Cold Room을 이용한 모형빙의 재료특성에 관한 실험적 연구
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김정현 | - |
dc.contributor.author | 최경식 | - |
dc.contributor.author | 정성엽 | - |
dc.contributor.author | 서영교 | - |
dc.contributor.author | 조성락 | - |
dc.contributor.author | 이춘주 | - |
dc.date.accessioned | 2021-08-03T05:51:11Z | - |
dc.date.available | 2021-08-03T05:51:11Z | - |
dc.date.issued | 2008-06-01 | - |
dc.identifier.uri | https://www.kriso.re.kr/sciwatch/handle/2021.sw.kriso/1353 | - |
dc.description.abstract | A full-scale field experiment is an important part in the design of ships and offshore structures. Full-scale tests in the ice-covered sea, however, are usually very expensive and difficult tasks. Model tests in a refrigerated ice tank may substitute this difficulty of full-scale field tests. One of the major tasks to perform proper model tests in an ice towing tank is to select a realistic material for model ice which shows correct similitude with natural sea ice. This study focuses on the testing material properties and the selection of model ice material which will be used in an ice model basin. The first Korean ice model basin will be constructed at the Maritime & ocean Engineering Research Institute in 2009. With an application to the MOERI ice model basin, in this study the material properties of EG/AD/S model ice of IOT Canada, were tested. Through comprehensive bending tests, the elastic modulus and the flexural strength of EG/AD/S model ice were evaluated and the results were compared with published test results from Canada. Instead of using an ice model basin, a cold room facility was used for making a model ice specimen. Since the cold room adopts a different freezing procedure to make model ice, the strength of the model ice specimen differs from the published test results. The reason for this difference is discussed and the future development for a making model ice is recommended. | - |
dc.format.extent | 7 | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.publisher | 한국해양공학회 | - |
dc.title | Cold Room을 이용한 모형빙의 재료특성에 관한 실험적 연구 | - |
dc.title.alternative | An Experimental Study for the Mechanical Properties of Model Ice Grown in a Cold Room | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.bibliographicCitation | 한국해양공학회지 논문집, v.22, no.3, pp 64 - 70 | - |
dc.citation.title | 한국해양공학회지 논문집 | - |
dc.citation.volume | 22 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 64 | - |
dc.citation.endPage | 70 | - |
dc.description.isOpenAccess | N | - |
dc.subject.keywordAuthor | Ice model basin | - |
dc.subject.keywordAuthor | Cold room | - |
dc.subject.keywordAuthor | Model ice | - |
dc.subject.keywordAuthor | Mechanical properties | - |
dc.subject.keywordAuthor | Flexural strength | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(34103) 대전광역시 유성구 유성대로1312번길 32042-866-3114
COPYRIGHT 2021 BY KOREA RESEARCH INSTITUTE OF SHIPS & OCEAN ENGINEERING. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.