Experimental evaluation of wave impact loads on semi-submersible structure according to trim angle

Abstract

This study considers the wave impact loads on the semi-submersible structure. To evaluate wave impact loads on the semi-submersible structure, a series of experiments are conducted in a 2D wave flume. In the experimental test, the semi-submersible half model is used, and 11 uniaxial force sensors are installed in deck side, column side, and deck bottom. Wave probes are, also, attached in the test model to measure the relative wave elevation. To generate horizontal and bottom wave impact on the test model, focusing wave is applied. The test model is fixed without any motion during each test, while the trim angle of the test model is changed to examine the effect of trim angle on wave impact load. Through this, the characteristics of the wave impact force at each position were investigated. Copyright ？ 2019 ASME