심해공학수조 소파판에 작용하는 파랑하중 및 소파효율 특성에 관한 모형시험 연구

Abstract

In this study, the model tests are performed for design of wave absorber plate. The wave absorber plate models are porous plate which are punched with porosity 0, 5, 10, 15 %, respectively. The wave absorber plate model with porosity 10% of these is used to research about number of plate and rear wall effect. It was found that the wave absorbing efficiency is dependent on porosity, number of plate and rear wall effect. And wave loads on the wave absorber plate are determined for design of full-scale wave absorber plate. Therefore, the results of this research could be used as one of the fundamental data for the design of wave absorber plate. these is used to research about number of plate and rear wall effect. It was found that the wave absorbing efficiency is dependent on porosity, number of plate and rear wall effect. And wave loads on the wave absorber plate are determined for design of full-scale wave absorber plate. Therefore, the results of this research could be used as one of the fundamental data for the design of wave absorber plate.