역설계법을 이용한 해양플랜트 플로트오버 설치용 LMU의 구조특성계수 추정
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이강수 | - |
dc.contributor.author | 박병재 | - |
dc.contributor.author | 정동호 | - |
dc.contributor.author | 성홍근 | - |
dc.date.accessioned | 2021-12-08T12:40:45Z | - |
dc.date.available | 2021-12-08T12:40:45Z | - |
dc.date.issued | 20161117 | - |
dc.identifier.uri | https://www.kriso.re.kr/sciwatch/handle/2021.sw.kriso/3658 | - |
dc.description.abstract | This paper is about the design of leg mating unit(LMU) which is generally utilized to protect impact from very heavy floating offshore structure in float-over installation operations. There are three specifications that are required for a vessel to perform a float-over. First, the vessel must have a width that is narrow enough to fit inside the substructure slot. Next, the vessel must be designed with an open stern in order for the vessel to exit the jacket slot. In order toensure the deck is perfect positioned on the vessel, the vessel must also be equipped with moveable casings. Last, but certainly not least, the vessel must have the strength and stability to carry and transport the topsides. The vessel is critical for a successful float-over operation. It is used to load the topside, transport it to the site, perform the float-over installation. LMUs are steel structures incorporating engineered elastomeric pads capable of absorbing immense loads that are installed in the topside or the substructure of a shallow offshore oil platform. This causes the topside of the platform to slowly lower onto the jacket. As the topside's weight is transferred from the barge to the substructure, vertical compression will occur on the LMUs. The elastomeric pads within the LMUs are designed to take up the static and dynamic forces of the topside structure, as well as mitigate the horizontal forces due to open sea motions during t | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.title | 역설계법을 이용한 해양플랜트 플로트오버 설치용 LMU의 구조특성계수 추정 | - |
dc.title.alternative | Estimation of Structural Characteristic Coefficients of Leg Mating Unit for Float-Over Installation Using Reverse Engineering | - |
dc.type | Conference | - |
dc.citation.title | 2016 한국해양공학회 추계학술대회 | - |
dc.citation.volume | 0 | - |
dc.citation.number | 0 | - |
dc.citation.startPage | 158 | - |
dc.citation.endPage | 161 | - |
dc.citation.conferenceName | 2016 한국해양공학회 추계학술대회 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(34103) 대전광역시 유성구 유성대로1312번길 32042-866-3114
COPYRIGHT 2021 BY KOREA RESEARCH INSTITUTE OF SHIPS & OCEAN ENGINEERING. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.