파랑 중 탑사이드의 플로트오버 설치시 Mating 작업에 대한 실험연구
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김남우 | - |
dc.contributor.author | 남보우 | - |
dc.contributor.author | 권용주 | - |
dc.contributor.author | 조석규 | - |
dc.contributor.author | 박인보 | - |
dc.contributor.author | 성홍근 | - |
dc.date.accessioned | 2021-12-08T11:40:54Z | - |
dc.date.available | 2021-12-08T11:40:54Z | - |
dc.date.issued | 20170629 | - |
dc.identifier.uri | https://www.kriso.re.kr/sciwatch/handle/2021.sw.kriso/3419 | - |
dc.description.abstract | In this study, a series of model tests were carried out to evaluate the mating operation during a float-over installation in waves. Three experimental models, which include a DTV (Deck Transportation Vessel), a topside and a jacket platform, were introduced. There are various interface items such as LMU(Leg Mating Unit)s, DSU(Deck Support Unit)s, fenders, tethers and moorings. The model tests were performed at Ocean Engineering Basin of KRISO. In the test, three mating stages of 10%, 40%, 70% load transfers were considered. Irregular and white noise waves were tested under three different wave headings. Focus is on the dynamic forces acing on the interface items and motion responses of the DTV. The experimental data are directly compared with the numerical simulation results. The mating performances are suggested with respect to the maximum impact forces acting on the LMUs and DSUs. It can be seen that the characteristics of the impact forces are closely related to the motion responses of the DTV. Discussions were made on the effects of wave headings, load transfers and topside center of gravity on the impact forces of LMUs and DSUs. In a fixed offshore structure installed in shallow depths, the topside, including the oil production platform and excavation equipment, is placed on a jacket structure fixed to the sea floor. | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.title | 파랑 중 탑사이드의 플로트오버 설치시 Mating 작업에 대한 실험연구 | - |
dc.title.alternative | Experimental Investigation on Mating Operation during Float-over Installation of a Large Topside in Waves. | - |
dc.type | Conference | - |
dc.citation.title | Proceedings of the Twenty-seventh (2017) International Ocean and Polar Engineering Conference | - |
dc.citation.startPage | 1162 | - |
dc.citation.endPage | 1167 | - |
dc.citation.conferenceName | Proceedings of the Twenty-seventh (2017) International Ocean and Polar Engineering Conference | - |
dc.citation.conferencePlace | 미국 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(34103) 대전광역시 유성구 유성대로1312번길 32042-866-3114
COPYRIGHT 2021 BY KOREA RESEARCH INSTITUTE OF SHIPS & OCEAN ENGINEERING. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.