Experimental Study on Development of Mooring Simulator for Multi Floating Cranes
- Authors
- Bae, Junhyeok; Cha, Juhwan; Seo, Min-Guk; Lee, Kangsu; Lee, Jaeyong; Ku, Namkug
- Issue Date
- 3월-2021
- Publisher
- MDPI
- Keywords
- mooring; multibody system; dynamic analysis
- Citation
- JOURNAL OF MARINE SCIENCE AND ENGINEERING, v.9, no.3
- Journal Title
- JOURNAL OF MARINE SCIENCE AND ENGINEERING
- Volume
- 9
- Number
- 3
- URI
- https://www.kriso.re.kr/sciwatch/handle/2021.sw.kriso/165
- DOI
- 10.3390/jmse9030344
- ISSN
- 2077-1312
2077-1312
- Abstract
- In this study, the coupled motion of a mooring system and multifloating cranes were analyzed. For the motion analysis, the combined equations of motions of the mooring line and multifloating cranes were introduced. The multibody equations for floating cranes were derived from the equations of motion. The finite element method (FEM) was used to derive equations to solve the stretchable catenary problem of the mooring line. To verify the function of mooring simulator, calculation results were compared with commercial mooring software. To validate the analysis results, we conducted an experimental test for offshore operation using two floating crane models scaled to 1:40. Two floating crane models and a pile model were established for operation of uprighting flare towers. During the model test, the motion of the floating cranes and tensions of the mooring lines were measured. Through the model test, the accuracy of the mooring analysis program developed in this study was verified. Therefore, if this mooring analysis program is used, it will be possible to perform a mooring analysis simulation at the same time as a maritime work simulation.
- Files in This Item
-
- Appears in
Collections - 친환경해양개발연구본부 > 심해공학연구센터 > Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.